CURRENT POSITION:LinkedHope Intelligent Technologies >> News
 

PCI-Systems announces a wide input range (110-230V AC input) intelligent 330W conduction cooled VPX Power Supply

2013/11/11 13:44:14  Clicks: Source:vita-technologies

PCI-Systems announces a wide input range (110-230V AC input) intelligent 330W conduction cooled VPX Power Supply

 

wide input range (110-230V AC input) intelligent 330W conduction cooled VPXPower Supply

Sunnyvale, CA--- November 6, 2013 ---PCI-SYSTEMS Inc. , a leading supplier of conduction cooled systems, today announced several  , 3U wide input range 110-230V AC input Power Supply, enabling accelerated development of rugged conduction cooled embedded systems.

The Rugged 3U VPX Power Supplies works with 110-230V AC input voltage and isolates the input voltage ground from the output voltage ground. The isolated conduction cooled 3U wide input range Power supply is conduction cooled and can provide up to 330 watts, 350W peak.

> Output voltages of +/-12V, +5V and +3.3V as well as +/- 12V aux and 3.3V aux are standard.

> Power factor correction

> Vita 46 and 48 Ready

> microprocessor based design, voltage setpoints, drift suppression and many other features

> works perfect with UPS and input hold time add-on cards based on Vita 62.1

Designed for high noise suppression, the power supply active input filtering supports the PICMG® 3.0 specifications for filtering system boards to EN55022 Class B limits.

In comparison to passive solutions, the use of active filtering reduces the volume of the common-mode choke, providing a low profile, surface mount device. Smaller size saves valuable board real estate and the reduced height enhances airflow in blade applications.

The power supply is designed to meet the intent of the following environmental specifications: (designed to meet intent of MIL-STD 810F)

> Operating Temperature: -40 to +85 °C at the board rail.

> Humidity: 0 to 95% Humidity / Non-condensing

> Shock: 40G / 11mS

> Vibration: 14Grms / 20-2000Hz

> EMC: Designed to meet intent of MIL-STD 461D (RE, RS, CE, CS)

> Conformal coating applied, parts are undercoated with epoxy.

> MIL-STD-1275B Military Vehicles 28DC

> MIL-STD-461E EMI, Ground CS101 and CE102

> Integrated EMI Filter per MIL-STD-461

> Transient Protection per MIL-STD-704A through E

> MIL-STD-1275AT w/ Reverse Polarity protection

  • Reading list
  • Today
  • Week
  • Month
 
About Us | Copyright | Join Us | Contact Us | Customer Service | Cooperation Partners