CURRENT POSITION:LinkedHope Intelligent Technologies >> News

PCI-Systems introduces 28V input, 1,600W, intelligent conduction cooled 6U VPX Power Supply series

2013/11/11 13:08:02  Clicks: Source:vita-technologies

PCI-Systems introduces 28V input, 1,600W, intelligent conduction cooled 6U VPX Power Supply series


6U  28V input intelligent 1,600W Power Supply
front view

6U VPX 28V input intelligent 1,600W Power Supply

Sunnyvale, CA--- November 06, 2013 ---PCI-SYSTEMS Inc. , a leading supplier of conduction cooled systems, today announced several  , 6U, high output Power Supplies, enabling accelerated development of rugged conduction cooled embedded systems.

The Isolated Rugged 6U VPX Power Supplies works with 16 to 36 VDC (28VDC nominal) input voltage and isolate the input voltage ground from the output voltage ground. The Isolated Rugged 6U heavy duty Power supply is conduction cooled, uses dual phase technology on all voltage rails and can provide up to 1,600 watts, has an efficiency of better than 92%.

> Output voltages of +/-12V at 80A, +5V at 80A and +3.3V AT 40A as well as +/- 12V aux and 3.3V aux are standard.

> Vita 46 and 48 Ready

> microprocessor based design, voltage setpoints, drift suppression and many other features

> works perfect with UPS and input hold time add-on cards based on Vita 62.1

Designed for high noise suppression, the power supply active input filtering supports the PICMG® 3.0 specifications for filtering system boards to EN55022 Class B limits.

In comparison to passive solutions, the use of active filtering reduces the volume of the common-mode choke, providing a low profile, surface mount device. Smaller size saves valuable board real estate and the reduced height enhances airflow in blade applications.

The power supply is designed to meet the intent of the following environmental specifications: (designed to meet intent of MIL-STD 810F)

> Operating Temperature: -40 to +85 °C at the board rail.

> Humidity: 0 to 95% Humidity / Non-condensing

> Shock: 40G / 11mS

> Vibration: 14Grms / 20-2000Hz

> EMC: Designed to meet intent of MIL-STD 461D (RE, RS, CE, CS)

> Conformal coating applied, parts are undercoated with epoxy.

> MIL-STD-1275B Military Vehicles 28DC

> MIL-STD-461E EMI, Ground CS101 and CE102

> Integrated EMI Filter per MIL-STD-461

> Transient Protection per MIL-STD-704A through E

> MIL-STD-1275AT w/ Reverse Polarity protection

  • Reading list
  • Today
  • Week
  • Month
About Us | Copyright | Join Us | Contact Us | Customer Service | Cooperation Partners